JJEV R300S CE Mobility Scooter For Adults, PG/Dynamic Controller,Full Suspension 4 Wheels,Motor 400W
Features
Electric powered,its maximum speed 7.5mph, driving range 19 miles per charge.
Detachable swivel padded captain seat with head and arm rest
Basket Detachable (Capacity 5kg)
Tiller angle adjustable
Puncture proof non-marking wheels & pneumatic wheels( Front wheels 9”&rear wheels 10")
Detachable battery case / carrier(A&B PARTS 35AH*2PCS 12VOLT rechargeable sealed VRLA AGM batteries
Full suspension 4 wheels
Motor 400W
Specifications
| Overall Dimension |
1200*600*1013mm |
| Gross Weight |
180lbs(82 Kg) |
| Turning Radius |
1200mm |
| Max. Speed |
7.5 mph(10kph) |
| Max. degree of climbing |
8゜ |
| Max. Range |
19miles(30KM) |
| Max. Load |
136Kg |
| Motor |
400W/24V |
| Battery Capacity |
35AH*2（vrla battery) |
| Battery Weight |
26Kg |
| Charger |
24V 5A |
| Wheel Size |
Front 9” solid / pneumatic Rear 10” solid/ pneumatic |
| Ground Clearance |
80mm |
| Controller |
24V 70A PG/ 90A DYNAMIC |
| Carton size |
1240*645*660cm |
| Packing Quantity |
39pcs/20GP, 112pcs/40HQ |
Control panel
intuitive control pane,it is easy to find yellow speed knob,red horn button,green front light button,finger lever(Wig-Wag) and battery level indicator Gauge.
Maximum Speed Knob
The speed control enables you to set the maximum speed of the scooter. Turn clockwise to increase the maximum speed and anti-clockwise to decrease. Always start at a slow speed until accustomed with the characteristics of your scooter. Do not put excessive pressure on the dial. Only turn as far as the stops. When driving in pedestrian areas such as shopping precincts and busy pavement areas always respect other pedestrians and turn the maximum speed down so that the scooter travels at the walking pace of others around you.
Horn Button
The red button operates the scooters horn. This should only be used to warn others of your presence and not as a rebuke of any form.
Front Light Button
The green button operates the front LED light.
Finger Lever (Wig-Wag)
The finger levers control the reverse and forward motion of the scooter – see ‘Starting To Drive ’ for operation. Remember, more pressure = more speed. Release the lever and the scooter will automatically come to a safe stop as the electromagnetic brake is applied. Always release the lever if the scooter behaves
erratically
On/ Off Key
The key switch is located on the middle of the tiller. Simply insert the key and turn clockwise to switch the power on. The display will light up to indicate the power is on. There may be a slight delay before the thumb levers operate as the controller checks the scooters circuits. Never leave the key in the switch unattended to prevent unauthorized use. Do not switch the power off to stop the scooter unless it is an emergency. The scooter will stop very abruptly if stopped in this way.
Battery Level Indicator Gauge
This gauge gives you a guide to the amount of charge left in the scooters batteries. This will give the truest reading when the scooter is in motion. Always fully charge the batteries before driving your scooter and never let the batteries become completely drained, as this may cause permanent damage to the batteries.
Adjustable tiller angle with charging function and delta handle,USB plug and cup holder
Puncture proof non-marking & free maintenance wheels
pneumatic wheels is deluxe version and full suspension 4 wheels ,which improves riding comfort on various roads
Brake Release/ Freewheel operation
The brake release lever is situated at the right rear of the scooter. This lever allows you to disengage the drive mechanism and push the scooter in ‘freewheel’ mode. To disengage the drive, push the lever to the front of the scooter as shown in the image below. The scooter can now be pushed.
Simply push the lever toward the rear of the scooter to re-engage the drive mechanism (the scooter c an now be driven). The scooter will not operate when the lever is in the disengaged position. The scooter must be turned off and on by the key switch to reset the circuits before it will resume normal operation. A 9 flash error will show if the brake is disengaged when it is switched on.
Seat Swivel& Slide， captain seat with headrest is deluxe version
The seat has a lockable swivel base to allow easier transfers. Simply lift the lever and rotate the seat at the same time. Releasing the lever will allow the seat to lock in position. The seat locks in 45 degree intervals. Always ensure the seat is in a locked position before mounting or dis-mounting the scooter. The seat should always be locked facing forward whilst driving
Seat Removal
To remove the seat, fold down the back of the seat and simply lift the seat away from the chassis while lifting the seat swivel lever.
Do not hang baggage or other objects on the back of the seat as this may affect stability.
Arm Adjustments
On each side of the seat towards the back there are two hand knobs, these are to adjust the width of the armrests or to remove then for transport.
If removing the armrests for transport, ensure that the hand knobs are re-tightened to avoid them rattling loose and falling out. Do not apply full body weight to the armrests for transferring. Lift the arm up out of the way to transfer to another seat
Battery box charging socket and circuit breaker reset
Charge the batteries completely (8-12 hours) prior to first use.
The R300S uses two 35 Amp, 12 Volt sealed lead acid batteries. The battery box is located under the front of the seat.
Depending on the use, terrain and driving conditions, the batteries will provide a range of 30km of travel. However, even if the power scooter is not in use, we recommend that the batteries are charged periodically. Note: Do not use any automotive batteries. They are not designed to handle a long, deep discharge and also are unsafe for use in power scooter. The useful life of a battery is quite often a reflection of the care it receives.
Low temperatures, rough terrain and the weight of the user c an affect battery performance. Your battery gauge is a guide only to the level of charge remaining in your batteries and will give its best indication while the scooter is moving.
manoeuvrability, It can be easily dissembled as below so that they can fit into vehicles for the purpose of traveling.
Notes
1.Turn the power off when transporting or not using mobility scooters
2.Ensure the seats is in a fixed position facing forwards before driving
3.Ensure the tiller is secure
4.Ensure the batteries are fully charged before your journey
5.Avoid rough or soft terrain and long grass wherever possible.
6.Follow the maintenance guide to ensure safe operation of mobility scooters.
